Before using the glass cooktop for the first time, we recommend cleaning it with CeramaBryte Ceramic Cooktop Cleaner. This helps protect the cooktop and makes cleanup easier. Daily use of this cleaner will also help keep the cooktop looking new. Other cleaning creams may not be as effective.

 

Use of sponges or cleaners other than those recommended can result in damage to the cooktop.

 

Normal Daily Use Cleaning:

  1. If using the cream version of CeramaBryte® Ceramic Cooktop Cleaner (WX10X300), shake the cleaning cream well and apply a few drops directly to the cooktop. If using the spray version of CeramaBryte® Ceramic Cooktop Cleaner (WX10X391), spray a small amount on the cooking surface.

  2. Use a paper towel or CeramaBryte® Cleaning Pad (WX10X350) to clean the entire cooktop surface.

  3. Use a dry cloth or paper towel to remove all cleaning residue. There is no need to rinse; however, it is important that you do not heat the cooktop until the cream has been cleaned off.

 

For information on CeramaBryte cleaners and cleaning accessories, visit: Haier Electric Range and Cooktop - Glass Cooktop Cleaners .

 

Consult your Owner's Manual for additional cleaning tips.

 

Burned-On Residue:

  1. Allow the cooktop to cool.

  2. Spread a few drops of CeramaBryte® (WX10X300) over the entire burned-on area.

  3. Using the included CeramaBryte® Cleaning Pad (WX10X350), rub the residue area, applying pressure as needed.

  4. For heavy, burned-on residue:

    • Hold a razor scraper ((WX10X0302) at approximately a 45º angle against the ceramic glass surface and scrape the soil. It will be necessary to apply pressure to the razor scraper in order to remove the residue.

    • Keep a small amount of cream on the residue as you scrape.

    • After scraping with the razor scraper, use the scrub sponge to remove any remaining residue.

  5. For additional protection, after all residue has been removed, polish the entire surface with the CeramaBryte® cleaner and a paper towel.

 

Water or White Marks:

  • If there are areas with a metallic sheen, these are caused by mineral deposits from evaporated water and food. You can remove them by cleaning with CeramaBryte® (WX10X300).

 

Metal Marks and Scratches:

  • Be careful not to slide pots and pans across your cooktop; it will leave metal markings on the cooktop surface.

  • These marks are usually removable using CeramaBryte® (WX10X300), a CeramaBryte® Cleaning Pad (WX10X350), and/or a razor scraper (WX10X0302).

  • If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave a black discoloration on the cooktop. This should be removed immediately before heating again or the discoloration may be permanent.

  • Carefully check the bottom of pans for nicks, gouges or any rough area as these types of imperfections will scratch the cooktop.

 

Patterned Speckles Changing Color:

  • This is caused by pan residue. The pattern on the glass has a rough surface and will “gather” material from the bottom of soft metal pans (copper or aluminum pans). It does not occur much with harder stainless steel pans. Cleaning cream and a razor scraper will remove this material from the cooktop glass.

 

Potential For Permanent Damage From Sugary Spills and Melted Plastic:

Special care should be used when removing hot substances from the cooktop surface to avoid permanent damage of the glass surface. Sugary spillovers (such as jellies, fudge, candy, syrups) or melted plastics can cause pitting of the surface of your cooktop (not covered by the warranty) unless the spill is removed while still hot. Special care should be taken when removing hot substances.

  1. Turn off all surface units and remove hot pans.

  2. Wearing an oven mitt:

    1. Use a single-edge new, sharp razor blade scraper to move the spill to a cool area on the cooktop.

    2. Remove the spill with paper towels.

  3. Any remaining spillover should be left until the surface of the cooktop has cooled.

  4. Do not use the surface units again until all residue has been completely removed.

 

NOTE: If pitting or indentation in the glass surface has already occurred, the cooktop glass will have to be replaced. In this case, service will be necessary. To schedule a repair appointment for Haier branded appliances in the U.S., visit https://www.haierappliances.com/support/schedule-service or contact Haier Appliances at 1-877-337-3639.

 

Hardened Plastic or Porcelain from a Teapot:

  • If any plastic or porcelain from a teapot melts/hardens onto the glass it usually cannot be removed because it bonds to the glass. The cooktop glass will have to be replaced.

  • If the plastic has not already hardened, try gently removing it (no promises here) using the process for removing melted plastic listed above. If this is unsuccessful, service will be necessary.

  • If pitting or indentation in the glass surface has already occurred, the cooktop glass will need to be replaced. To schedule a repair appointment for Haier branded appliances in the U.S., visit https://www.haierappliances.com/support/schedule-service or contact Haier Appliances at 1-877-337-3639.

 

The CeramaBryte® cleaners and all recommended supplies are available through the GE Appliance Parts Center