Possible error codes for Portable Washers:


dO, E0 or E2 - indicates the lid switch is detected as open

 

  • Verify the lid is closed properly.

 

dd -   actually not an error code

 

  • When this code occurs during a spin cycle, check door (lid) to make sure it is closed properly and/or check to make sure load is balanced (redistribute clothes).

 

E1 or E6 - indicates an issue with the drain

 

  • Verify the drain pump filter (where applicable) is clear (the filter is accessible through the door at the bottom of the unit).

  • Verify the drain hose is not pushed too far into the standpipe (Siphon condition).

  • Verify the drain hose is not kinked or crimped.

 

E3 - indicates an issue with the spin

 

  • Verify the drum is not over filled with garments.
  • Verify the unit is level (level means that all four legs of the unit are supporting weight).

 

E4 - Indicates an issue with filling

 

  • Verify the water is turned on to the washer.
  • Make sure the water pressure is not too low. 

 

If you continue to have problems, please contact Haier Appliances at 1-877-337-3639 or visit https://www.haierappliances.com/support/schedule-service to arrange service.