The TIMER can be set to turn the unit on and/or off after a certain amount of time (.5 hrs up to 24 hours). The TIMER can be set to Start and Stop or Stop and then Start.
Timer ON Button
On-Off Operation:
- Start the unit and select the desired operating mode (except SLEEP mode)
- Press the TIMER ON button to enter the TIMER ON mode. The remote control will start flashing “ON”.
- Every time the TIMER ON button is pressed, the length of time increases in 0.5 hour increments between hours 0 and 12, and 1 hour increments for times between hours 12 and 24. Holding down on the TIMER ON button will rapidly cycle the time.
- Once the desired length of time is selected for the unit to turn on, press the CONFIRM/CANCEL to confirm this setting.
Cancel TIMER ON:
- With the TIMER ON set, press the CONFIRM/CANCEL once to cancel TIMER ON.
Timer OFF Button
On-Off Operation:
- Start the unit and select the desired operating mode (except SLEEP mode)
- Press the TIMER OFF button to enter the TIMER ON mode. The remote control will start flashing “OFF”.
- Every time the TIMER OFF button is pressed, the length of time increases in 0.5 hour increments between hours 0 and 12, and 1 hour increments for times between hours 12 and 24. Holding down on the TIMER OFF button will rapidly cycle the time.
- Once the desired length of time is selected for the unit to turn on, press the CONFIRM/CANCEL to confirm this setting.
Cancel TIMER ON:
- With the TIMER OFF set, press the CONFIRM/CANCEL once to cancel TIMER OFF.
Note:
- After replacing batteries or a power failure, the TIMER settings will need to be reset.
- According to the Time setting sequence of TIMER ON or TIMER OFF, either Start-Stop or Stop-Start can be achieved.